FormFutura B.V. Opiniões 22

I have been using ApolloX for some time for demanding technical prints - and the material consistently delivers top results.
There was a problem once with two larger rolls (presumably a rare production error) - but customer service responded quickly, friendly and extremely accommodating.
You don't often find manufacturers like this who take responsibility and treat you as a customer as an equal.
That's why I will continue to order here in the future.
A clear recommendation.

Super Super service
Mijn ervaring met Formfutura is in een woord geweldig.
Ik was begonnen aan een groot project en had PLA besteld refill Traffic White naar heel wat testen en mislukte printjes toch eens even contact opgenomen met Formfutura.
Daar de vraag gesteld of ik misschien iets over het hoofd had gezien en of ze nog tips hadden om geslaagde prints eruit te krijgen, tuurlijk eerst gekeken of mijn printer wel in orde is, dat was allemaal oke.
Dus nog wat verder getest na enige tijd werd mijn filament weer gegrind.
Toch maar weer contact opgenomen met Formfutura zij boden mij aan om eens de E PLA te testen of dat verschil maakte en ja hoor geen problemen meer alle prints lukte weer als van ouds.

Dus na het testen weer contact opgenomen met Formfutura en mijn bevindingen gedeeld.
Tevens had ik gevraagd of het mogelijk was om mijn onaangebroken refill PLA te ruilen voor de E PLA en dat was mogelijk en zodoende ook gedaan.

Ik kan alleen maar zeggen dat dit de manier is om met klanten om te gaan open transparant meedenkend en kijken naar mogelijkheden.
Hier zouden velen een voorbeeld en mogen nemen.

Ps: mocht je een Snapmaker Artisan bezitten zover mijn ervaring past de refill PLA niet zo goed bij deze machine mijn advies zou zijn E PLA van Formfutura
Mocht iemand de refill PLA wel werkend hebben laat dan even weten wat jou setup is voor de Snapmaker Artisan en Orca slicer

Alle medewerkers die ik de afgelopen dagen gesproken heb dank je wel voor de super support en ga zo door 👍

They helped me very well with choosing what filament goes well with my printer. Also very fun social media channels!

J'ai recement acheter du filament Refill. pensant que cela allait passez dans mon AMS et les bobines bambu. Je constate que non en regardant les diametres. Je decide donc d'imprimer leurs bobines. Et a ma plus grande surprise la bobine dis "refill" n'etait PAS SERRER ! resultat quand l'extrudeure tire le filament ce dernier rentre dans la bobine et crée des noeuds !! 33€ mis a la poubelle !! En attente d'une reponse du SAV

The ApolloX "modified" ASA is so impure that it won't even dissolve. Prints like an elastic gum stuck in the nozzle until the ugly lump just falls off.

Forget about smoothing with acetone vapor to make it garden ready or gluing with liquid acetone to assemble pieces. I left the failed print floating in a jar of 100% pure acetone over the night to make glue and nothing happened to the surface.

I used Formfutura Titan X ABS in white colour for two very large part with complex shapes. I was very quite impressed about the filament on the following 3 counts.

Warpage was close to zero as claimed.
Interlayer adhesion was great.
The supports came of very easily with very little witness marks . I used 0.2 mm layer thickness with one layer vertical separation and 0.3 mm horizontal separation and worked brilliantly.

Overall I am very happy with the product.

I made a criticizing product review on the Formfutura website and found that it never got published.

I actually made a fair diplomatic product review… Sorry Formfutura – you got at least one very poor product… "Bring my product review as you are obligated and this review here will change as well".

Does anyone (besides me) wonder how only 5 star product ratings are present on the Formfutura webpage…?

I would have rated the product by 2 stars, but when a seller / manufacturer censor a sober ‘not-positive’ customer opinion, I find one star way too much. Putting lid on customer opinions might be the worst…

Easyfil PLA works very well on my printer and our 3D pens.
Nice prints

Materials are very good, no damage or any extruder blocks ever happened. The most valuable feature are the consistency of materials: month after month, characteristics remain always the same.

Down to earth company, always prepared to give extensive support;
Very fluent communication.

Products and service have been excellent, and they have made a great effort to make their products affordable in the US with their very competitive shipping rates.

Eveyithing went flawlesslly! Well done guys!

I have ordered from these guys a couple times now and they have been great to work with. One order did have a minor mistake but they were quick to address the problem and went above and beyond in my opinion.

Didn't expect arrival for a least 4 more days.

We receive our package on time.

rapid, serious, very good product ;)

rápido y lo esperado

The filament was sent promptly and prints well

The red is great, the transparent is not as transparent as other filaments

Excellent filament,fast delivery.Recommend to everyone.

High quality filaments.
Quick deliveries.