Replacement Lid Valve

Opiniões sobre Replacement Lid Valve

Classificação média por estrelas: 5 em 5

5,0

(1 opinião)

A classificação por estrelas de um produto é calculada com base na média de todas as opiniões.

Comprar agora
logótipo da HOTBIN Composting

Vendido por HOTBIN Composting

www.hotbincomposting.com

•

888 Opiniões

4,7

A informação nesta página é baseada exclusivamente nas opiniões de produto que os clientes da HOTBIN Composting escreveram via Trustpilot.

Aqui está o que as pessoas destacaram

Qualidade

4,0

1 classificação

Qualidade-preço

3,0

1 classificação

Detalhes do produto

The valve is made from expanded polypropylene (EPP); the same material used to manufacture the rest of the HOTBIN unit. The valve snuggly fits into its recess on the raised lid panel but occasionally they can be removed or damaged by a crafty squirrel or bird. For best results, ensure that the valve is opened in the correct direction - push down on the back of the valve. Open the valve to approximately 2mm, this is sufficient enough to allow the water vapour to escape but not enough to allow unwanted odours to escape. Once set to 2mm open, the valve should not be adjusted.
  • Marca: HOTBIN Spares
Sinalizar este produto

Todas as opiniões

Classificada 5 em 5 estrelas

The birds took it within 24 hours

Qualidade: 4
Qualidade-preço: 3
logótipo da HOTBIN Composting

Resposta da HOTBIN Composting

We’re sorry to hear that some birds took a shine to your HOTBIN valve and you have had to replace it so soon after your bin arrived. To prevent this happening again, if you think it needs addressing you could place a square of chicken wire or similar over the valve. We'll feed this back to the design team. Thanks

The HOTBIN Team