Creality Opiniões 

They were fine as a diy printer company. But now they are just over priced with no support for faulty printers they send to you. Plenty of better options out there AVOID

I have had the printer suffer a catastrophic failure twice without detection Creality won't acknowledge the problem or fix it. Insist I buy a new printhead. The printer is less than a year old. Every other print fails. To add insult to injury, Creality can take up to 2 months to respond and you will spend quite some time correcting their notes as they seem not to read through emails. I have given up after two severe failures; One destroyed my buildplate and hot end. The other was about half a kilogram of plastic being melted unto the printhead, encasing it. AI failed to detect both counts. I have concerns over a fire starting as the AI does not work. Stay away from this product.

Received my K1 max on December 29, 2023, 2 weeks later It stopped working. Communicated with customer service and received an email they were out for 2 weeks for chineese new year, after many emails I sent all requested information and was told I would receive a new motherboard and extruder board, after 3 weeks they came and I installed them and the thing went CRAZY, it sounds like it is going to blow up, I reached back out with an email and they claim they have to many emails.
I contacted my credit card company and disputed the charge, this thing has been down for over 2 months.
Im moving on to Bambu Labs

As with all these reports the customer service sucks! The only reason I gave a 2 instead of 1 is because when the K1 max I ordered worked it was great. The bad is that when it stopped for the 3rd time in 3 months customer service has been nothing short of abysmal. I have messages every day for over a week with no response. Not a sorry, we will look into it, or even a pi55 off. They just don't respond.

Purchased a creality falcon 2 22w laser and it hasn't worked since the day I bought it, total waste of money.
Have been in touch with creality, received a tracker id number, informed to wait for the email.. that was a week ago, heard nothing since..
No customer service.. would not buy from this company again..

Purchased Ender 5 S1 through Amazon back in April. Now when it tries to do a auto bed leveling it comes to the front left corner and the cr probe does not drop down and the table comes up and crashes into extruder. They want a video of the crash which I can't do because I don't have a camera to take one. The explanation of what is happening can be understood by a 2 year old but they don't seem to get it, I guess they don't understand English. They also said they couldn't reach the site I purchased it from "Amazon"., I sent them a copy of the receipt from Amazon. Never again will I buy or suggest to anyone else to buy one of their products.

Ordered a Halot Mage 8K resin printer, no matter what I did, I even asked from a friend of mine (engineer) to check, it printed nothing!!! After many many emails I sent it back. Problem was that they couldn't send me a prepaid ticked so a paid 150€ euros to ship it to Germany.
After they received it, no one would reply to my emails so I asked for a refund from PayPal, but it's been 3 months and I'm still waiting for the shipping fee to be refunded!!
DO YOURSELF A FAVOR AND STAY AWAY!!

I ordered Creality Hyper PLA, tested it, dreadful quality, dreadful result, no faster than basic PLA, I requested a refund, instead they ignored this and sent a second roll. Now sat on two useless rolls of Hyper PLA. They won't supply a return address in the UK, despite buying from what looks like a UK site, and after a week of no movement on PayPal claim, left this right up until the last day to respond, to further spin this claim out longer... I will never buy another roll of anything they sell, it's rubbish quality, and be aware, when you buy this from what you think is a UK seller, they are not, their address is here

( Shenzhen Zhongchuang 3D Technology Co., Ltd.
Floor 4, Building 2, Kedar Group Center Building, No. 168 Tongsha Road, Nanshan District, Shenzhen, Guangdong, C2, 518129)

This will cost you £38 to send 1 x roll here, they have warehouses in the UK of course, one in London and one in Leicester, good luck trying to obtain those addresses.. So, they have you over a barrel, nobody in the right mind is going to pay £38 for an item costing £24

My setup is a Creality Ender 3 S1 Pro, Creality Sonic Pad... Never had any issues with eSun or Anycubic... Avoid Hyper PLA in the brand of the very make of the machine they sell, the hardware is great, but their Hyper PLA is possibly the worst filament I have ever used. The customer service lacks the understanding of UK Consumer Rights, so you are banging your head against a wall. They sent me a G-Code file to test the filament, however, I have no idea what that file is, and I 100% won't be messing my fine tuned printer up to test anything. I used the setting recommended by what was on the roll, and this should have been enough to see a fast result, instead of the gloop finish it did.

Eventually, PayPal also decided this company is a shambles and refunded my payment. I have since binned the product as it is not worth sending back. Creality, you make wonderful hardware, but your customer service leaves a lot to be desired. You will never receive any repeat business from me.

The printer I got, for now, works fine. The sales department and costumer service were appalling thou. If I could give them a zero, I would. A simple delivery instruction (made following their own guidelines) was ignored - "Leave the parcel at my door. It can't be seen from the street and I have a doorbell camera". How hard was it to instruct Australia Post with that? Xiaomi did it. Customer service, when I complained about it, brushed me off by basically saying, "Sorry for your inconvenience. We can't do anything". What a joke! No wonder everybody says that "from Creality you can only move up in 3D printing".

I bought a Halot Mage from them last week and nothing I do will get prints to stick to the build plate, I reached out to their customer service team and it took nearly a week for a response, followed by 4-5 days until their next reply and it has been over a week now and still nothing back from them. Gonna pursue a refund and buy a working resin printer from Elegoo instead

Really bad customer service. No cancel button on their website. I talked with customer service just after I purchased them but they couldn't cancel it and I still got the package.

Purchased the Ender 3 Max Neo and it was defective in more ways than one right out of the box. Thermal runaway immediately and spent hours troubleshooting with customer support. Then they sent a new thermistor that was too short to fit. They then sent me a return label and I shipped it back. It's now been two weeks and they simply say "sales is working on it". Sales? It's an EXCHANGE!
The customer service has been horrible! Do not buy any Creality products directly from Creality or just buy another brand. Fairly certain I'm out $340.00. Expensive lesson.

I just got my Ender 3 S1 Pro on Friday. This is Tuesday morning and it already broke down. The entire unit reboots itself 2 seconds after entering the print menu on the touch screen. I contacted Creality via their online chat and the b***h has the nerve to tell me to calm down after telling me to take the thing apart and check the motherboard with a multimeter. WTH, am I supposed to service this piece of crap myself? I am returning this junk to the reseller and NEVER buying from Creality again.

I purchased this machine in November 2022 for >$400. When searching my orders on my account, I cannot return this product anymore and do not have the option. The last thing the Creality support told me was...."..you bought this on Amazon....return it there."

Need to ask another question???....open a new chat window (or series of incognito windows) and hope they answer your question(s) in an all-in-one single answer/instance/time.

I gathered all of my information regarding serial & order numbers, uploaded pictures of my device's QR codes, submitted support requests via chat, sent various emails and I still cannot print. They respond by pasting a URL of an article that does not apply then closes your support request and moves on without verification.

There is no USA phone number to call. I have 3 (4 now) different support chat support windows open right now and have been open for since around 8 AM (it is now 1:34 PM). i am a well seasoned cyber security guy by day and am very able to troubleshoot this printer.

+++
You should really, really think twice before a Creality purchase. Their support is...you might as well have a brick for a printer WHEN in malfunctions.
+++

My current issue array is:
1. refuses to read ANY SD card (printed 1 time/thing/item/print for all eternity)
2. tried 3 different brand new Lexar SD cards formatted as requested (FAT 32 - 4096 bytes per sector) and the printer will not read .stl, .gcode, .bin or any files you place on the card for firmware or printing.
3. Hours resulting in weeks of energy & time spent researching articles, videos, support forums, chats, and emails.
4. When you attempt to contact support via chat, you enter a queue, I was waiting for several hours and then finally the last screenshot up there is what I was left with, "Chat support windows closes".

False Advertisement of printers, poor quality, and they don't honor any return policies. Customer service is rude through their emails with week long response times. Typical Chinese quality and attitude I guess. Avoid at all costs. Out $1k.

Purchased the printer for my son for Christmas. It worked one month! He had purchased numerous parts to make it work, spending more money on an already brand new 3D printer. Crealty wrote through Amazon on how to fix it and nothing worked. I have continuously written them through any site I can and they have done absolutely nothing to rectify the situation. They even stopped responding. Crealty took my $400 on a crappy built piece of equipment and then blew me off. I feel sick that I spent this much money on a gift that was garbage and never fully worked. To know the customer service is this awful, really makes me sick. I have never experienced service this awful. I will continue to pursue this until someone helps make this thing work. I can’t believe how awful this entire experience has been on such an expensive product. Where is the goodness in this world?!

I bought an Ender 3 v2 Neo, big mistake
The rollers have flat spots on all 3 axis, not good for a brand new printer
When I ask how to return it they just keep sending videos on how to level the bed and un clog the hot end.
They totally avoid any question of returning it.
Also ordered PLA which never arrived.

I bought a CR10 Smart. It did not work right out of the box. The printer goes through the self leveling process, however when I try to print, the hot end is so close to the bed that the filament can't come out. I have tried adjusting the Z axis adjustment from 0.25mm up to the max at 1.5mm and the hot end still is so close to the bed the filament can't come out. Through all of this Creality says there is nothing wrong with the printer.

After months od trying to make it work, I was finally fed up and ended up destroying the whole printer by kicking it and forcefully breaking the frame and everything else out of frustration. I had cr 10s pro. This company has no existent quality control. In retrospect I realized I basically built another whole printer by purchasing and changing all the broken components. Avoid it like a plague.

Just do yourself a favour and avoid. Awful customer service. Sent a completely broken machine and they are refusing to help or refund £400 down and 30 emails later and no closer to a resolution. At this point it's a scam.